Polymers
Rheapol™
Acrylic Pharma Polymers
Manufactured and supplies the full range of pH
dependent / Enteric & Delayed release / Taste masked & Moisture
barriers acrylic pharma polymer coating / Matrix systems under the Brand
name of RHEAPOL™
| Type |
Application |
Dissolution Properties |
Functionality |
Grade |
Availability |
Polymer Content |
Advantages |
Pharmacopoeial mono graphics |
| Enteric Coating |
| RHEAPOL™
L |
Drug delivery in duodenum
|
Soluble in intestinal
fluid above pH 5.5 |
Anionic polymers of
methacrylic acid and ethacrylates with – COOH functional groups
|
RHEAPOL™
L 100-55 |
Powder |
95% |
Effective Enteric coating
|
Ph, Eur., JPE, USP/NF |
| RHEAPOL™
L 30 D-55 |
Aqueous Dispersion |
30% |
Ph-Eur., JPE, USP/NF |
| RHEAPOL™ L
|
Drug delivery in jejunum |
Soluble in intestinal fluid above pH 6.0 |
Anionic polymers of methacrylic acid and ethacrylates with –
COOH functional groups |
RHEAPOL™
L 100 |
Powder |
95% |
Site specific drug delivery in intestine by combinations with
RHEAPOL™ L/S grades
|
Ph-Eur., JPE, USP/NF |
| RHEAPOL™
L S |
Drug delivery in ileum |
Soluble intestinal fluid above pH 7.0 |
Anionic polymers of methacrylic acid and
ethacrylates with – COOH functional groups |
RHEAPOL™
L S 100 |
Powder |
95% |
Site specific drug delivery in
intestine by combinations with RHEAPOL™
L/S grades |
Ph-Eur., JPE, USP/NF |
| Taste, Odour Masking, Moisture
Protection and Immediate release Coating |
| RHEAPOL™
E |
Taste and odour masking, isolating
coating and moisture protection |
Soluble in gastric fluid up to pH 5.0, Swellable
and permeable above pH 5.0 |
Cationic polymer with
dimethylaminoethyl ammonium functional groups |
RHEAPOL™
E 100 |
Power |
98% |
Organic & Hydro alcoholic, matrix
and film coating system |
Ph, Eur., JPE |
|
Our technical advice on the uses of our materials is
given without obligation. The buyer is responsible for the application and
processing of our products and is also liable for observing any third party
rights. Technical data concerning our products are typical values. Subject
to alteration. | TM = Trademark | RHEAPOL
= Trademark of Cornileus Pharmaceuticls (P) Ltd, INDIA.
Readymix
ZEUSMIX™
Ready Mix Coating
Manufactured with Eur, USP/NF and JPE approved raw
materials and suppliers the full range of immediate release / enteric &
delayed release / specialty barrier film coating systems under the brand
name of ZEUSMIX™
| Product |
Description |
Reconstitution |
Reconstitution |
| Immediate Release Film
Coating System |
| ZEUSMIX™
AQS |
HPMC based aqueous system |
11% |
2.50% |
| ZEUSMIX™
ORG |
HPMC based organic solvent system |
5% |
2.50% |
| ZEUSMIX™
UNV |
HPMC / Acrylic based Aqueous /
Organic / Hydro – Alcoholic System |
Aqueous – 11%
Organic Solvent – 5%
Hydo - Alcoholic - 9% |
2.5 % |
| Immediate Release Film
Coating System |
| ZEUSMIX™
EC-S-100 |
An Enteric Coating System System pH 7.0
(Methacrylic acid Co- Polymer type "B" S 100 USP / NF
based.) Organic enteric Coating system ("B" S 100) |
8% |
9% |
| ZEUSMIX™
EC-HPMC-P |
Organic Coating System pH 5.5 (Hydroxy Propyl
Methyl Cellulose Phthalate based.) |
5% |
9% |
| ZEUSMIX™
EC-L100-55 |
An Enteric Coating System pH 5.5 (Methacrylic Acid
Co-Polymer type "C" USP/NF based) |
Hydro alcoholic 8% Organic Solvent 8% |
9% |
| ZEUSMIX™
EC-L-100 |
An Enteric Coating System pH 6.0 (Methacrylic type
Co- Polymer type "A" USP/NF based.) |
Organic Solvent 8% Hydro Alcoholic 8% |
9% |
|
| Product |
Description & Application Examples |
| ZEUSMIX™
MSK |
This System can be used for Taste masking of Bitter
Active Ingredients like Ciproflxicin, Dicyclomin Hydrochloride,
Ofloxacin, Amoxycillin, Chloroquin Phosphate, Roxythromycin,
Paracetamol, Sildenfil Citrate Citrizine Hydrochloride, etc. |
|
| Product |
Description |
Reconstitution |
Average Weight gain |
| Sustained Release |
| Product |
Description |
Reconstitution |
Average Weight gain |
| ZEUSMIX™
SRS |
Sustained Release Coating & Direct Compression
System, (Wet Granulation By Organic / Hydro Alcoholic / Aqueous) |
5% |
Depending on the end application & Release
profile of the Active Drugs |
| Barrier Coating System |
| ZEUSMIX™MBORG
|
Organic Film Coating System Protects the
Hygroscopic Drug Molecules from Atmospheric Moisture without
affecting the Active Ingredient |
5% |
4% |
| ZEUSMIX™
MBHA |
Hydro Alcoholic Aqueous Film Caoting System
Protects the Drug Molecule from Atmospheric Moisture without
affecting the Active Ingredient |
8% |
4% |
|
Our technical advice on the uses of our materials is
given without obligation. The buyer is responsible for the application and
processing of our products and is also liable for observing any third party
rights. Technical data concerning our products are typical values. Subject
to alteration. | TM = Trademark | ZEUSMIX
= Trademark of Cornileus Pharmaceuticls (P) Ltd, INDIA.
Sugar/ MCC Spheres
METISSPHERE™
Sugar / MCC Spheres
Manufactures in compliance with BP, EP, USP, NF, JP
and supplies the full range of Neutral Pellets under the Band name of
METISSPHERE™
METISSPHERE™
METISSPHERE™ S - Sugar Spheres
Techno-Specs:
- Sugar Spheres contain not more than 92.0 % of sucrose, calculated on
the dried basis. The remainder consists of maize starch, according to
EP.
- Possibility to analyze the Sugar Sphere according to Ph. Eur., USP/NF&JP.
- Sugar Spheres are used on critical excipients for controlled or
sustained release drug delivery technology.
- Sugar Spheres are inert pellets formulated with sucrose and maize
starch; manufactured for pharmaceutical, Herbal, and Neutraceutical
solid dosage formulations.
- Sugar Spheres particle sizes are available on request.
| Sizes in Mesh |
| 12/14 |
16/20 |
25/30 |
35/40 |
| 14/16 |
18/20 |
20/30 |
30/40 |
| 14/18 |
18/25 |
25/35 |
35/45 |
| 16/18 |
20/25 |
30/35 |
40/45 |
|
METISSPHERE™ M - MCC Spheres
(Neutral Pellets for Sugar Free Products)
Techno-Specs:
- MCC Spheres, have been developed using microcrystalline cellulose
(MCC) as base.
- Microcrystalline cellulose is a purified, partly depolymerised
cellulose, prepared from alpha-cellulose.
- MCC complying Eur., USP/NF.
- MCC Spheres are sugar free pellets and offer a good alternative for
sugar.
- MCC has high physico-chemical inertness, so it improves the stability
of finished products.
- MCC Spheres exhibit a very low level of friability & pellets have
a better resistance in layering operation through an air fluidized
machine.
- MCC is insoluble in water and in most organic solvents.
- MCC Spheres nearly white or beige hard, uniform and spherical
particles & very low friability level.
- MCC Spheres particle sizes are available on request.
| Sizes in Mesh |
| 12/14 |
18/25 |
35/45 |
| 14/18 |
25/35 |
45/60 |
|
Our technical advice on the uses of our materials is
given without obligation. The buyer is responsible for the application and
processing of our products and is also liable for observing any third party
rights. Technical data concerning our products are typical values. Subject
to alteration. | TM = Trademark | METISSPHERE
= Trademark of Cornileus Pharmaceuticls (P) Ltd, INDIA.
Our Product
